简介（作者编辑）：意大利品牌 FILA Solutions - Focus Concrete(en)
摘要（系统识别）：
FINISHING (for indoor surfaces only)
A
米
FOCUS:CONCRETE
we recommend applying a protective finishing wax that:
surface care solutions
-Protects surfaces from wear caused by pedestrian
passage
Reinforces the existing sealer's anti-stain protection
Choose a finishing wax depending on the desired surface finish:
MATT for a matte finish,SATIN for a satin finish and LONGLIFE
for a glossy finish
STAIN REMOVERS
CONCRETE
NOSPOT
Removes oil and grease stains
Leaves no traces if the stain is fresh
Perfect for quarry tile,red porcelain and natural stone
Guarantees excellent performance even on untreated surfaces
5R95
Removes coloured organic stains:wine,coffee,
soft drinks,tea...
FILA SOLUTIONS FOR
Especially formulated to remove stains on natural stone surfaces
Can be used on polished natural stone because it does not damage the polished finish
Ideal for ceramic surfaces with low absorbency
CONCRETE FLOORS
NORUST
Removes superficial rust stains
Viscous consistency:can be applied directly on the stain,reducing product waste
Fast acting:eliminates stains in just 15 minutes
ation about product use and instructions,read the label carefuly and consult
CONCRETE FLOORS
PROTECTION
Concrete is a mixture composed of fine and coarse aggregates bonded
2 SOLUTIONS:CHOOSE THE BEST PRODUCT FOR YOUR NEEDS!
together by cement,water and additives.The percentage of each component
FILA proposes 2 treatments for the protection of concrete,depending on the setting in which the product is
is detemmined by "design mixes"that create concrete types with different
applied.
characteristics.
CONCRETE SHIELD
While concrete is highly resistant to compression,its low tensile
Consolidating anti-stain and
BETON
strength requires the use of a metal structure placed inside the pour,
dust resistant sealer
GARAGE SAVER Sealer
commonly known as "reinforced concrete".
_For indoors and outdoors
such as warehouses,exhibition spaces and garages
This material is often used in infrastructures(bridges,tunnels,etc.)and in
021
-For indoor use
industrial and residential construction (prefab and on-site load bearing
A
structures)such as:industrial flooring.floors with prefab elements(marble
chip cement tile,interlocking pavers)and residential flooring (polished
concrete screed).
In the residential and industrial construction sectors,concrete presents
important advantages:
-customisable:different floorings can be obtained depending on
the "design mix"of the concrete
-high mechanical resistance
FOCUS:CONCRETE SHIELD
applicable as a continuous surface,with few joints and without
grout
-can be installed indoors and outdoors with different finishes
1.STAIN REPELLENT PROTECTION
Concrete is a porous material,so it's fundamentally important to treat it with an oil and water
repellent and dust resistant sealer in order to increase its durability over time.The infiltration of
water particles or chemical agents in the pores of the material cause the deterioration of the surface
which in time can compromise the aesthetic and mechanical characteristics of concrete.
(Fig A)
(Fig D)
-The sealer penetrates into the pores of the concrete(Fig.B),granting the surface and the material water
and oil repellent properties (Fig.C).Hence,protected surfaces resist water,stains,dirt and weathering
The are "concrete effect"or "cement based"architectural floorings on the market (for example,micro
(Fig.D).
concrete)that reproduce the aesthetic look of concrete.These products are mainly resins with additives.
Generally,they do not require protective treatments and only need finishing treatments.However,we recommend
Makes subsequent cleaning easier.
following the manufacturer's instructions.
_Suitable for the protection of outdoor surfaces:provides resistance to weathering and resists UV rays
(ASTM G154)
2.DUST RESISTANCE AND CONSOLIDATION PROPERTIES
HOW SHOULD YOU CARE FOR CONCRETE FLOORS?
UNTREATED
TREATED WITH CONCRETE SHIELD
e
e
CLEANING
Once the concrete wall/floor is poured and the installation is complete,carry out post-
Physically consolidates the material,making it dust resistant by bonding the cement dust to the cement
installation cleaning with PS87 PRO.
substrate.
Increases resistance to wear,pedestrian passage and intense traffic.
Surfactants found in PS87 PRO's alkaline formula,together with mechanical
cleaning action,capture the dirt particles which are then rinsed away with water,
resulting in a perfectly clean surface.
3.COLOUR ENHACING PROPERTIES
Grants treated indoor and outdoor surfaces an enhanced finish.Concrete protected with CONCRETE
In addition,PS87 PRO is also suitable for heavy duty cleaning surfaces before sealer
SHIELD presents brighter,more intense colouring,resulting in a superior aesthetic effect.
application,removing stains and built up layers of dirt.