简介（作者编辑）：意大利品牌 FOAMGLAS - Brochure(en)
摘要（系统识别）：
Product Profile
FOAMGLAS
The Thermal Insulation System.
Building
www.foamglas.co.uk
Overview of Product Properties
1 Waterproof FOAMGLAS has an hermetical-
7 Acid-resistant FOAMGLAS consists of pure
9 Ecological FOAMGLAS consists of recycled
ly sealed closed cell glass structure,therefore it
glass,therefore it is resistant to organic solvents
glass.Only renewable power is used in the
is waterproof.
and acids.
manufacturing process.
Advantage:Does not absorb any moisture and
Advantage:FOAMGLAS"cannot be affected by
Advantage:After decades of use as thermal
does not swell.
aggressive mediums and atmospheres.
insulation FOAMGLAS can be ecologically recycled.
2 Vermin-proof FOAMGLAS is inorganic,
8 Easy to work with FOAMGLAS consists of
therefore it cannot rot and it is vermin-proof.
glass cells and is easy cut,trimmed and shaped.
Advantage:No risk of rot in locations above or
Advantage:At the construction site
below ground.Resistance to nesting,breeding
FOAMGLAS is easily be cut to size ensuring a
or seed germination.
close fit,which ensures continuity of the insula-
tion.
3 Compression-proof FOAMGLAS has high
natureplus
compressive strength.Due to its cell structure
long-term compressive loads can be applied
without movement or deformation.Advantage:
A load-bearing thermal insulation,in locations
where high compressive loads are present.
4 Non-combustible FOAMGLAS consists of
pure glass,therefore it is non-combustible to
classification EN 13501:A1.
Advantage:In a fire situation there is no pro-
pagation of flames,no smoke or toxic gases
5 Vapour-tight FOAMGLAS has an hermetically
sealed closed cell structure,therefore it is gas
tight and water vapour-tight
Advantage:Vapour cannot permeate the
sealed glass cell structure.FOAMGLAS provides
a constant thermal insulation performance for
the lifetime of the building.The potential pene-
tration of radon gas is dramatically reduced.
6 Dimensionally stable FOAMGLAS is dimen-
sionally stable because glass neither shrinks nor
swells.
Advantage:There cannot be any warping,buck-
ling or creep.Cellular glass material has thermal
movement characteristics similar to concrete and
steel.The insulation is adhesive bonded to the
structure.
Additional Characteristics
Composition
Pure glass with a high percentage of recycled glass,inorganic,no added fire retardants or
binding agents.
Applicable limit temperatures
From -265C to +430C
Melting point (cf.DIN 4102-17)
>1000C
Water absorption
0
Biological influences
Resistant against microbes,rodents,insects and vermin.
Water vapour diffusion resistance figure
Capillarity and hygroscopicity
None
Fire behaviour(EN 13501-1)
A1
Dimensional stability
Does not swell,shrink,warp or creep
Airborne sound reduction
FOAMGLAS Building.Product Profile